Contact Heat Transimmision Test
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
Samfurin parameters of the Contact Heat Transimmision Test
| Standards | EN 702, ISO 12127-1 |
| A diamita na lamba surface | ¢ 25,2 ± 0.05 mm |
| Hita Dumama Range | Dakin da zazzabi zuwa 500 Temperatuur |
| Zazzabi ji kewayon | ≥ 500 C |
| Contact karfi | 49 ± 0.5N |
| Contact gudun | 5 ± 0.02mm / s |
| M lokaci mai židayar lokaci | 0-99.99 seconds, daidaito: +0,01 seconds |
| samfurin size | 80 mm a diamita |
| Weight | 600 (D) X 250 (mm) X 650 (mm) |
| girman | 55KG |
| yanayi zazzabi | Operating25 ± 5 ℃ |
| gas Hardware | Propane da iska matsa iska |
Product Profile of the Contact Heat Transimmision Test
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Samfurin Feature of the Contact Heat Transimmision Test
- Metal hita da high zazzabi resistant abu da aka yi amfani da, da kuma diamita na lamba surface ya 25,2 ± 0.05 mm.
- Hita dumama range: dakin da zazzabi zuwa 500 C, mutum-inji dubawa na iya zama real-lokaci nuni.
- The lamba surface na calorimeter 25 ± 0.05 × D5 ± 0.02mm, da kuma cikin kewayon zazzabi ji ne ba kasa da 500 C.
- Contact karfi: 49N, contact gudun: 5mm / s, calorimeter servo mota iko, za a iya ta atomatik tashi da kuma fall, shirin kula da zai iya ta atomatik kammala dukan gwajin aiwatar.
- A hita dandali iya matsar da hagu da dama a layi daya, wanda shi ne m for loading kuma iya tabbatar da kare lafiya da aiki.
- LCD nuni panel, PLC ta atomatik rubuta farkon zazzabi, dokin lokaci, dokin lokaci ƙarshe zafin jiki da kuma real-lokaci zazzabi.
Contact Heat Transimmision Test {asa ne zartar da m tufafi (ciki har da hannu majibinta) ko ta bijiro da batun kafa kayan nufin kare da m lamba zazzabi. A aikace-aikace na misali aka ƙuntata ga lamba yanayin zafi daga 100 ° C zuwa 500 ° C.
A na'ura da aka tsara da kuma kerarre bisa ga EN 702 da ISO 12127-1 nagartacce.
