Contact Heat Transimmision Test
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
Produkt parameters of the Contact Heat Transimmision Test
| Standards | EN 702, ISO 12127-1 |
| De diameter fan de kontaktpersoan oerflak | ¢ 25,2 ± 0,05 mm |
| Heater Heating Range | Keamertemperatuer oant 500 Temperatur |
| Temperatuer Measurement berik | ≥ 500 C |
| Contact force | 49 ± 0.5N |
| Contact snelheid | 5 ± 0.02mm / s |
| Critical tiid timer | 0-99.99 sekonden, Foarkommen: +0,01 sekonden |
| Sample grutte | 80 mm yn diameter |
| Gewicht | 600 (D) X 250 (mm) X 650 (mm) |
| Grutte | 55KG |
| Omjouwingstemperatuer | Operating25 ± 5 ℃ |
| gas Supplies | Propaan en loft komprimearre loft |
Product Profile of the Contact Heat Transimmision Test
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Produkt Feature of the Contact Heat Transimmision Test
- Metal kachel mei hege temperatuer bestendig materiaal brûkt waard, en de diameter fan kontakt oerflak wie 25,2 ± 0,05 mm.
- Heater heating berik: keamertemperatuer oant 500 C, minske-machine ynterface kin wêze real-time display;
- It kontakt oerflak fan calorimeter 25 ± 0,05 × D5 ± 0.02mm, en it oanbod fan temperatuur mjitting is net minder as 500 C.
- Kontakt krêft: 49N, kontaktpersoan snelheid: 5mm / s, calorimeter servo motor kontrôle, kin automatysk heger en fal, programma control kin automatysk folje it hiele test proses;
- De kachel platfoarm kin neo lofts en rjochts in parallel, dat is handich foar it laden en kin soargje foar de feiligens fan de operators.
- LCD display paniel, PLC automatysk registrearret de start temperatuer, drompel tiid, drompel tiid beëiniging temperatuer en real-time temperatuer.
Contact Heat Transimmision Test apparatus is fan tapassing foar beskermjende klean (ynklusyf hân beskermers) of syn Constituent materialen bedoeld om te beskermjen tsjin hege kontakt temperatuer. De tapassing fan de standert wurdt beheind ta kontakt temperatuer fan 100 ° C oant 500 ° C.
It apparaat is ûntwurpen en makke neffens EN 702 en ISO 12127-1 noarmen.
