Kontakt Heat Transimmision Test
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
Toote parameters of the Kontakt Heat Transimmision Test
Standardid | ET 702, ISO 12127-1 |
Läbimõõt kontaktpind | ¢ 25,2 ± 0,05 mm |
Soojenduse Range | Toatemperatuuril kuni 500 Temperatuur |
Temperatuuri mõõtmine vahemikus | ≥ 500 C |
Kontakt jõud | 49 ± 0,5 N |
Võta kiirus | 5 ± 0,02 mm / s |
Kriitiline taimeriga | 0-99,99 sekundit, täpsus: 0,01 sekundit |
Näidissuurus | 80 mm läbimõõduga |
kaal | 600 (D) x 250 (mm) X 650 (mm) |
suurus | 55kg |
ümbritseva õhu temperatuur | Operating25 ± 5 ℃ |
gaasitarned | Propaan ja õhu suruõhu |
Product Profile of the Kontakt Heat Transimmision Test
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Toote Feature of the Kontakt Heat Transimmision Test
- Metal kuumuti temperatuuirkindlatest materjali kasutati ning läbimõõt kontaktpind oli 25,2 ± 0,05 mm.
- Soojenduse vahemik: toatemperatuuril kuni 500 C, inimene-masin liidese saab reaalajas kuva;
- Kokkupuutepind kalorimeetri 25 ± 0,05 x D5 ± 0,02 mm, ning temperatuurivahemikus mõõtmine ei ole väiksem kui 500 C.
- Kontakt jõud: 49N, kontakt kiirus: 5mm / s, calorimeter servomootor kontrolli, saab automaatselt tõusu ja languse, programmi kontrolli saab automaatselt täita kogu katse käigus;
- Keris platvormi saab liikuda vasakule ja paremale paralleelselt, mis on mugav laadimine ja võib ohutuse tagamiseks operaatorid.
- LCD tablool PLC automaatselt salvestab start temperatuur, läve ajal läve aeg lõpetamise temperatuuri ja reaalajas temperatuuri.
Kontakt Heat Transimmision Katseseade on kohaldatav kaitseriietust (sh käsitsi kaitsjad) või selle koostisaineid ette nähtud kaitseks kõrge kontakt temperatuuri. Kohaldamise standard on piiratud kontakt temperatuur 100 ° C kuni 500 ° C.
Seade on konstrueeritud ja toodetud vastavalt EN 702 ja ISO 12127-1 standarditele.