Kontakt Wärme Transimmision-Test
Contact Heat Transimmision Test Apparatus with Automatic Programming Control
parameters of the Kontakt Wärme Transimmision-Test
Standards | EN 702, ISO 12127-1 |
Der Durchmesser der Kontaktfläche | ¢ 25,2 ± 0,05 mm |
Heizung Heizung Bereich | Raumtemperatur bis 500 Temperatur |
Temperaturmessbereich | ≥ 500 C |
Kontaktkraft | 49 ± 0,5 N |
Kontakt Geschwindigkeit | 5 ± 0,02 mm / s |
Kritische Zeittimer | 0 bis 99,99 Sekunden, Genauigkeit: 0,01 Sekunden |
Probengröße | 80 mm Durchmesser |
Gewicht | 600 (D) x 250 (mm) x 650 (mm) |
Größe | 55KG |
Umgebungstemperatur | Operating25 ± 5 ℃ |
Gasversorgung | Propan und Luft Druckluft |
Product Profile of the Kontakt Wärme Transimmision-Test
Contact heat resistance test device, developed according to EN702 test standard, also meets the requirements of domestic AQ 6103-2007 welding protective gloves contact heat resistance test standard. The test results can show the contact temperature, the starting time and the threshold time. The principle is that under the set contact temperature, the protective fabric can contact the heated cylinder at the same time withstanding the pressure of 49N. The time when the temperature rises from the initial temperature to 10 degrees C is called the threshold time, and the time is used to evaluate the protective weaving. Thermal protection performance of the product.
Feature of the Kontakt Wärme Transimmision-Test
- Metallheizer mit hochtemperaturbeständigem Material verwendet wurden, und der Durchmesser der Kontaktfläche betrug 25,2 ± 0,05 mm.
- Heater Heizbereich: Raumtemperatur bis 500 C, Mensch-Maschine-Schnittstelle kann Echtzeit-Anzeige sein;
- Die Kontaktfläche des Kalorimeters 25 ± 0,05 × D5 ± 0,02 mm, und der Bereich der Temperaturmessung nicht weniger als 500 ° C
- Kontaktkraft: 49N, Kontaktgeschwindigkeit: 5 mm / s, Kalorimeter Servomotorsteuerung kann automatisch steigen und fallen, Steuerprogramm kann automatisch den gesamten Testprozess abzuschließen;
- Die Heizplattform bewegen kann nach links und rechts parallel, die zum Laden geeignet ist und kann die Sicherheit des Bedienpersonals gewährleistet.
- LCD-Anzeigetafel, PLC zeichnet automatisch die Starttemperatur, Schwellenzeit, Schwellenzeit Abschlusstemperatur und Echtzeit-Temperatur.
Kontakt Wärme Transimmision Testvorrichtung ist anwendbar auf Schutzkleidung (einschließlich Handschutz) oder seiner konstituierenden Materialien bestimmt gegen hohe Kontakttemperatur zu schützen. Die Anwendung der Norm wird an Kontakttemperaturen beschränkt von 100 ° C bis 500 ° C.
Die Vorrichtung entworfen und hergestellt nach EN 702 und ISO Standards 12.127-1.