China Building Materyal Flammability Tester tiggama ug Suppliers | kapanganuran

Building Materyal Flammability Tester

Mubo nga paghulagway:

Ang sumbanan mao ang usa ka paghisgot sa ISO 9705 " ang nawong materyal nga bug-os nga gidak-on sa lawak test " writing standard of combustion test, the test method to simulate the corner fire scenario as a condition of standard test, and test the installation of the sample completely according to actual use, which is one of the most reliable standard test method.


  • Min.Order Quantity: 1 yunit
  • Presyo: mausab
  • Package: plywood Case
  • Model: SL-FL1583
  • Standard: ISO 9705:2016
  • Detalye Product

    Product Tags

    ISO 9705Building Materials Flammability Tester Fire Tests — Full - Scale Room Test For Surface Products

    Product pasiuna  sa  mga  pagsulay Fire  Full - Scale Room Test Kay nawong Products

    Based on Oxygen Consumption Principle GB/T 25207-2010 《Fire tests-Full-scale room tester for surface products》.The standard is a reference to ISO 9705《the surface material full size room test 》writing standard of combustion test, the test method to simulate the corner fire scenario as a condition of standard test, and test the installation of the sample completely according to actual use, which is one of the most reliable standard test method.Due to the relatively complex sample quantity and test conditions required by this test, it is usually used in fire science research and to evaluate the combustion characteristics of materials that cannot be correctly evaluated by small size test.
    The test device consists of four parts, including combustion chamber, flue gas collection and sampling system, gas analysis and data processing system and gas supply system. The test was carried out in a combustion chamber with a sample surface area of about 21 m2 and the door was normally open. The tested materials were installed according to the actual use. A rectangular triangular sand box burner with propane gas was installed at the corner of the inner wall of the room. During the test, the flow rate of gas should be controlled to make the standard heat output of the fire source 100 kW before 10 minutes. When the material did not explode, the flow rate of gas should be adjusted to increase the heat output to 300 kW and last 10 minutes. During a total 20-minute test period, the test can be stopped if there is flashover. The determination of explosive phenomena can be judged by observing and testing curves of heat release rate. 
    During the test, the total heat release, heat release rate, flue gas generation and flue gas generation rate were tested.

    Performance Product mga kinaiya sa mga  pagsulay Fire  Full - Scale Room Test Kay nawong Products

    1.Full set sa mga ekipo naglakip sa combustion lawak, tubo gas koleksyon ug sampling sistema, gas pagtuki ug data pagproseso sistema ug gas suplay sa sistema.
    2. Ang conical tubo gas maniningil instalar direkta sa ibabaw sa gibug-aton nga plataporma ug sa sample. Ang ubos nga kabahin mao ang 3000mm X 3000mm ug ang gitas-on mao ang 1000mm. Sa tumoy sa mga conical tubo gas maniningil mao 900mm X 900mm X 900mm square. Sa samang panahon, duha ka 500 mm X 900mm steel palid instalar sa ibabaw square sa pagporma sa usa ka tubo gas homogenizer.
    3. Ang kinamub gitas-on sa stainless steel aso pahungaw pipe dili ubos pa kay sa 5000mm ug ang iyang diametro mao ang 400 mm. Aso pagsagol lalang nga-instalar sa duha ka tumoy.
    4. Ang tambutso nga sistema adunay igong kapasidad sa pagkolekta sa tanan nga mga tubo gas nga namugna pinaagi sa pagkasunog test. Ang pahungaw gidaghanon sa mga fan mahimong padayon adjust, ug ang tambutso rate mao ang dili kaayo kay sa 3.5m / s.
    5. Ang aso pahungaw fan mao ang centrifugal fan, sa sulod nga liner mao ang stainless steel, ang temperatura pagbatok dili ubos pa kay sa 300 degrees, ug ang speed nga adjust sa frequency pagkakabig fan.
    6. Ang sukdanan laing sa mga gibug-aton nga device mao ang 0-5KG, ug ang katukma dili ubos pa kay sa 0.1g.
    7. Ang komprehensibo nga sukod nga dapit mao ang himan sa presyon sa pagsusi, tulo ka thermocouples, gas sampling imbestigasyon ug aso Densidad pagsukod sistema.
    8. sandbox burner mapuno sa grava sa 4mm-8mm gidak-on tipik ug balas uban sa gidak-on 2mm-3mm tipik. Ang top layer sa ibabaw nga balas mao ang ang-ang sa ibabaw nga ngilit sa burner.
    9. nawong ignition ang gisagop alang sa ignition sa balas kahon burner, ug ubos nga ignition kalampusan rate sama sa aligato ignition dili gigamit.
    10. nasangkapan sa ultraviolet siga monitor ug pagpalong sa pagpanalipod device aron sa pagsiguro sa kaluwasan sa sistema sa;
    11. Mass dagan controller uban sa laing mga 0 g / s-7 g / s, pagbasa tukma dili ubos pa kay sa 1.5%, maximum output gahum sa 300 KW;
    12. Ang tubo gas sampling nga sistema, nga naglangkob sa abo filter, compressor tigkondensar, pa-uga kolum, sampling bomba ug modagayday meter, kinahanglan nga makahimo sa epektibo nga Kolektahon tubo gas sample ug mosuhop sa pahungaw gas.
    13. Gipasulod diaphragm bomba, sampling dagan dili ubos pa kay sa 13L / min;
    14. Ang filter ulo sa imported nga aso ug abog filter gilangkuban sa lig-on nga PTFE uban sa 0.5um bildo fiber filter materyal nga sa sulod.
    15. compressor tigkondensar, makapabugnaw kapasidad 320KJ / h, yamog punto kalig-on 0.1 degree, yamog punto nagahunong kausaban 0.1K, makapabugnaw dagan dili ubos pa kay sa 6L / Min;
    16. imported nga rotor flowmeter, pagsukod range mao ang 0-5L / min;
    17. Ang komprehensibo nga igsusukod device naglangkob sa tulo ka mga imported nga OMEGA thermocouples kansang mga kontak kinahanglan nga nahimutang sa usa ka arko sa usa ka radyos sa (87 + 5) mm gikan sa axis, ug ang anggulo sa taliwala kanila mao ang 120 degrees.
    18. Ang bi-direksiyon imbestigasyon konektado sa usa ka imported nga presyon sa sensor uban sa usa ka igsusukod nga-laing mga sa labing menos (0-200) Pa ug usa ka tukma sa <2 Pa. Ang tubag panahon sa 90% output sa presyon sa sensor mao ang 1 s sa labing .
    19. Ang oksiheno analyzer kinahanglan nga paramagnetic ug makahimo sa pagsukod sa labing menos 02 uban sa usa ka konsentrasyon sa 16% -21% (V / V). Ang tubag panahon sa oksiheno analyzer kinahanglan nga dili molabaw sa 12 segundos. Ang maanod ug kasaba sa analyzer kinahanglan nga dili molabaw sa 100 x 10-6 sa 30 minutos. Ang output sa sistema sa data-angkon kinahanglan nga adunay usa ka maximum nga resolusyon sa 100 x 10-6.
    20. Carbon dioxide analyzer kinahanglan nga IRI matang ug makahimo sa pagsukod sa labing menos 0% - 10% CO2 konsentrasyon. Ang linearity sa analyzer kinahanglan nga sa labing menos 1% sa mga bug-os nga-laing. Ang tubag panahon sa analyzer kinahanglan nga dili molabaw sa 12 segundos.
    21. aso Densidad pagsukod sistema instalar sa kilid pipe sa pahungaw pipe uban sa flexible joint. Ang incandescent suga gigamit sa (2900 +100) K temperatura kolor.
    22. Optical elemento nga igsusukod, pagsukod range mao ang 400-750 nm makita nga kahayag, transmittance tukma mao ang 0.01%.
    23. Ang 100% ug 0% kalibrasyon matang sa mga elemento Optical sukod mao ang: zero punto kalibrasyon ang nahuman sa milingi sa incandescent nga kahayag tinubdan ug software click sa ibabaw sa 0%; 100% kalibrasyon ang nahuman pinaagi sa pagklik sa 100% nga walay occlusion sa kahayag nga dalan, ug walay neyutral filter gigamit aron mohaom Optical data dalan;
    24. Ang lalang sa pagsukod naglibot sa atmospera, presyon sa adunay usa ka tukma sa ± 200 Pa.
    25. Ang data-angkon ug analysis nga sistema nagsiguro sa tukma ug kasaligan sa data-angkon ug sa automatic recording sa gikinahanglan data matag 3 segundos. Ang kalkulasyon sa software data mao ang husto nga ug ang mga resulta sa mga epektibo. Ug makahatag sa mosunod nga kalibrasyon ug operasyon interface;
    26.O 2 / CO 2 analyzer kalibrasyon: Oh 2 / CO 2 output kasaba ug maanod kalibrasyon; ug ang resulta output porma;
    27. Ang software naglakip sa optical sistema kalibrasyon, kasaba ug maanod kalibrasyon sa tubo gas pagsukod sistema ug output nga matang sa mga resulta.
    28. Ang software naglakip sa optical sistema kalibrasyon, filter kalibrasyon ug resulta output nga porma.
    29. Ang software naglakip sa hangin gidaghanon kalibrasyon, hangin volume control range kalibrasyon ug resulta output nga porma.
    30. Ang software naglakip sa lakang kalibrasyon ug resulta output nga porma.
    31. Ang software naglakip sa pagsulay pamaagi ug sa output sa dagway sa mga resulta.
    32. Nasangkapan sa computer ug printer nga sistema.

    Product  lantugi  sa  pagsulay Fire  Full - Scale Room Test Kay nawong Products
    Applications: building materials, shipping materials
    Standards: DS/ISO/TR 9705-2, ISO 9705:2016
    Size: Combustor Size: 2.4M (L) X 3.6M (H) X 2.4M (W)
    Weight: 700KG
    Smoke hood size: 3M (W) X 3M (D) X 1M (H)
    Installation requirements: Electricity requirements: 220V, 10A; 380V, 5KW
    Ambient temperature: 10 ℃ to 35 ℃
    Gas Requirements: Propane Gas Calibration Gas: N2, CO2 Standard Gas


  • Balik:
  • Next:

  • Isulat ang imong mensahe dinhi ug ipadala kini ngadto sa kanato