China SL-FL56 Protective Clothing Radiant Heat Resistant Test Equipment Manufacturers and Suppliers | Skyline
industrial sewing machine

SL-FL56 Protective Clothing Radiant Heat Resistant Test Equipment

Kratki opis:

The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366.


  • Količina Min.Order: 1 jedinica
  • Cijena: Po dogovoru
  • Pakiranje: Šperploča Case
  • Model: SL-FL56
  • Standardi: AQ 6103/BS EN 366:1993/DIN EN 366:1993/ISO 6942:2002
  • Pojedinosti o proizvodu

    proizvoda Oznake

    Radiant Heat Tester for Protective Clothing Protection Against Heat And Fire

    Product introduction of the Protective Clothing Protection Against Heat And Fire

    The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366. The instrument consists of two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation. Method B measures the radiation heat transfer index (RHTI) of the material by measuring the test time required to raise the back temperature of the sample by 12 or 24 degrees, and then determines the thermal protection performance of the material.

    Karakteristike performansi  of the Protective Clothing Protection Against Heat And Fire

    1. The convective heat resistance test device is composed of radiation device, sample bracket, data acquisition and software system.
    2. The thermal radiation device is composed of six Glowbar heat radiation tubes with working temperature not less than 1100 degrees.
    3. Sample clamping device is cooled and protected by circulating water cooling device.
    4. Copper plate calorimeter made of oxygen-free superconducting copper is used to measure the heat radiation flux.
    5. The sample holder can move horizontally, and the heat radiation flux can be determined by different positions.
    6. Equipped with weighting device, it can be used to apply 2N standard gravity to the sample.
    7. Data acquisition system can record heat radiation flux, temperature, time and other parameters.
    8. Equipped with computer and printer device, it can output data and print test report. -
    Application: Safety Protection

    Proizvod  parametri the Protective Clothing Protection Against Heat And Fire

    Standardna AQ 6103 / BS EN 366: 1993 / DIN EN 366: 1993 / ISO 6942: 2002
    Veličina 1300mm (L) x 500mm (W) x 1200mm (H)
    Težina 160KG
    Zahtjevi za struju 220, 70 g
    Sobna temperatura 10 do 35 ℃ ℃
    zahtjevi za plin Air izvor kompresor za zrak
    primjena Zaštita za sigurnost

     




  • Prethodna:
  • Sljedeća:

  • Napišite poruku ovdje i pošaljite nam ga
    industrial sewing machine