ຕັ້ງ Flame Tester
Vertical Flame Tester The Insulating Glove Fire Resistance Test
Product introduction of the Vertical Flame Tester
ອີງຕາມ GB / T 17622-2008 ແລະ EN 60903 ຖົງມືໄຟອຸປະກອນການຕໍ່ຕ້ານການທົດສອບສນວນຖືກພັດທະນາ, ຊຶ່ງເປັນທີ່ເຫມາະສົມສໍາລັບການເຮັດວຽກທີ່ມີຊີວິດສວມຖົງມືປອງທົດສອບການຕໍ່ຕ້ານໄຟ.
Performance characteristics of the Vertical Flame Tester
1. Standard stainless steel box with transparent observation window can detect flame spread rate in time.
2. One stopwatch timer and one ignition device each.
3. Needle valve regulates the height of flame.
4. The burner is fixed on the sliding track for easy operation. The needle valve can adjust the flame height.
5. Equipped with ASTM D5025 standard Bunsen lamp with inner diameter of 9.5 mm (+0.3 mm), the flame temperature and height can be adjusted.
6. Equipped with GB/T 17622-2008 6.6.2 standard stainless steel sample stand two;
7. Equipped with flame height gauge.
ຜະລິດຕະພັນ parameters of the Vertical Flame Tester
| ຄໍາຮ້ອງສະຫມັກ | ການປົກປ້ອງຄວາມປອດໄພຂອງ |
| ມາດຕະຖານ | AQ 6103, EN 60903: 2003 |
| ມິຕິ | 500mm (W) X 550 ມົມ (H) X 300 (D) |
| ນ້ໍາຫນັກ | 19 KG |
| ຄວາມຕ້ອງການໄຟຟ້າ | 220V, 50HZ, 3A |
| ຄວາມຕ້ອງການສິ່ງແວດລ້ອມ | ອຸນຫະພູມ (20 + 2) ລະດັບ C, ຄວາມຊື້ນ (65 + 5)% |
| ຄວາມຕ້ອງການອາຍແກັສ | propane |
