China Protective Clothing Radiant Heat Resistant Test Equipment Manufacturers and Suppliers | Skyline

Protective Clothing Radiant Heat Resistant Test Equipment

Կարճ նկարագրություն:

The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366.


  • Min.Order Քանակ: 1 միավոր
  • Գին: պայմանագրային
  • Փաթեթ: Նրբատախտակ գործը
  • Մոդել: SL-FL09
  • Ստանդարտներ: AQ 6103/BS EN 366:1993/DIN EN 366:1993/ISO 6942:2002
  • Ապրանք Մանրամասն

    Ապրանք Tags

    Radiant Heat Tester for Protective Clothing Protection Against Heat And Fire

    Product introduction of the Protective Clothing Protection Against Heat And Fire

    The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366. The instrument consists of two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation. Method B measures the radiation heat transfer index (RHTI) of the material by measuring the test time required to raise the back temperature of the sample by 12 or 24 degrees, and then determines the thermal protection performance of the material.

    Բնութագրերին  of the Protective Clothing Protection Against Heat And Fire

    1. The convective heat resistance test device is composed of radiation device, sample bracket, data acquisition and software system.
    2. The thermal radiation device is composed of six Glowbar heat radiation tubes with working temperature not less than 1100 degrees.
    3. Sample clamping device is cooled and protected by circulating water cooling device.
    4. Copper plate calorimeter made of oxygen-free superconducting copper is used to measure the heat radiation flux.
    5. The sample holder can move horizontally, and the heat radiation flux can be determined by different positions.
    6. Equipped with weighting device, it can be used to apply 2N standard gravity to the sample.
    7. Data acquisition system can record heat radiation flux, temperature, time and other parameters.
    8. Equipped with computer and printer device, it can output data and print test report. -
    Application: Safety Protection

    Ապրանք  պարամետրերը the Protective Clothing Protection Against Heat And Fire

    ստանդարտ AQ 6103 / BS EN 366: 1993 / DIN EN 366: 1993 / ISO 6942: 2002
    չափ 1300mm (L) X 500 մմ (Վտ) X 1200mm (H)
    քաշ 160KG
    էլեկտրաէներգիայի պահանջները 220V, 70 ա
    Մթնոլորտային ջերմաստիճան 10 ℃ է 35 ℃
    գազի պահանջները Օդի compressor օդի աղբյուր
    դիմում Անվտանգություն եւ պահպանություն

     




  • Նախորդ:
  • Հաջորդ:

  • Գրեք Ձեր հաղորդագրությունն այստեղ եւ ուղարկեք այն մեզ