China Protective Clothing Radiant Heat Resistant Test Equipment Manufacturers and Suppliers | Skyline

Protective Clothing Radiant Heat Resistant Test Equipment

Luv hauj lwm:

The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366.


  • Min.Order Quantity: 1 unit
  • Nqe: sib tham kom
  • Pob: plywood Case
  • Qauv: SL-FL09
  • Standards: AQ 6103/BS EN 366:1993/DIN EN 366:1993/ISO 6942:2002
  • khoom Nthuav dav

    khoom cim npe

    Radiant Heat Tester for Protective Clothing Protection Against Heat And Fire

    Product introduction of the Protective Clothing Protection Against Heat And Fire

    The thermal radiation resistance tester is used to determine the thermal radiation protection performance of protective materials, which meets the test standards of ISO 6942 and EN 366. The instrument consists of two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation. Method B measures the radiation heat transfer index (RHTI) of the material by measuring the test time required to raise the back temperature of the sample by 12 or 24 degrees, and then determines the thermal protection performance of the material.

    Performance yam ntxwv  of the Protective Clothing Protection Against Heat And Fire

    1. The convective heat resistance test device is composed of radiation device, sample bracket, data acquisition and software system.
    2. The thermal radiation device is composed of six Glowbar heat radiation tubes with working temperature not less than 1100 degrees.
    3. Sample clamping device is cooled and protected by circulating water cooling device.
    4. Copper plate calorimeter made of oxygen-free superconducting copper is used to measure the heat radiation flux.
    5. The sample holder can move horizontally, and the heat radiation flux can be determined by different positions.
    6. Equipped with weighting device, it can be used to apply 2N standard gravity to the sample.
    7. Data acquisition system can record heat radiation flux, temperature, time and other parameters.
    8. Equipped with computer and printer device, it can output data and print test report. -
    Application: Safety Protection

    Khoom  tsis muaj the Protective Clothing Protection Against Heat And Fire

    Standard AQ 6103 / BS EN 366: 1993 / DIN EN 366: 1993 / ISO 6942: 2002
    loj 1300mm (L) X 500mm (W) X 1200mm (H)
    Nyhav 160KG
    Hluav taws xob yuav tsum 220V, 70A
    ambient kub 10 ℃ 35 ℃
    Gas yuav tsum Cua compressor cua qhov chaw
    Daim ntawv thov Kev Nyab Xeeb tiv thaiv

     




  • Yav dhau los:
  • Tom ntej:

  • Sau koj cov lus no thiab xa nws mus rau peb