Popular Design for Building Material Flammability Test Machine - TPP Thermal Protection Performance Tester – Skyline

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Astm F963 Toy Testing Equipment , Cone Calorimeter , Iso 11925-2 Flammability Tester , Adhering to the business philosophy of 'customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
Popular Design for Building Material Flammability Test Machine - TPP Thermal Protection Performance Tester – Skyline Detail:

TPP Thermal Protection Performance Tester High-precision Including Automatic Data Acquisition System

Product introduction of the TPP Thermal Protection Performance Tester

TPP thermal protective performance tester is mainly used to test the thermal insulation performance of flame retardant protective clothing fabric exposed to radiation and convective heat sources. It is used to test the thermal protective performance of protective clothing, safety shoes, gloves, helmet exterior surface, etc.The testing standards of NFPA 1971, ASTM D4018, GB 8965.1-2009, ISO 17492, etc.

Performance characteristics of the TPP Thermal Protection Performance Tester

1. The test instrument shall include the sample base assembly, the support of the sample base assembly, the heat source, the shield, the sensor assembly, the recorder and the gasket. It shall also have the gas source, the gas flowmeter, the burner and the sensor.
2. Movable corundum protective plate, with temperature resistance of 1800 degrees, can shield flame and reduce test error.
3. Two Meker burners with 45 degrees are installed to provide standard convective heat source with 9 quartz tubes.
4. The diameter of Meker burner is 38 mm and the diameter of inner hole is 5/16 inches. It can provide 800-1200 BUT heat output. The burner mouth is a metal mesh structure. The lower air valve of the burner can be adjusted and the mixing ratio of air and combustible gas can be adjusted.
5.Five or nine T150 quartz infrared tube arrays can provide thermal radiation flux of 13-40 kW/㎡±4 kW/㎡
6. Under the thermal radiation of quartz infrared tube, the total heat flux can be set to 83 kW/㎡±2 kW/㎡ by adjusting the gas supplied to Meker burner.
7. The calibrated heat flow meter is water-cooled, and its working range is 0-100KW/m2, and its maximum usage range is 150%.
8. The response time of the heat flow meter is less than 200 ms, the radiation rate is more than 0.95, and the output signal is more than 5 mV in the working range.
9. Copper plate calorimeter can be used to detect convective heat and radiation heat, as well as the temperature on the back of the sample.
10. Rotor flowmeter can adjust the flow rate of combustion gas, the accuracy is (±2%) and the measuring range is more than 3L/min.
11. Pointer pressure gauge, intake pressure can be adjusted by pressure relief valve, the range of pressure relief valve is 0-15 psi;
12. A quarter rotary plug can cut off the flammable gas manually.
13. The resolution of the temperature acquisition system is 0.1C and the accuracy is ±0.75 ℃
14. The data acquisition speed of the automatic data acquisition system is sub/0.05 seconds, and the cold-end compensation is provided for the measured data of the thermocouple.
15. Equipped with computers and printers, with standard test software, to provide standard test curves.

Product parameters of the TPP Thermal Protection Performance Tester

 Standard  ASTM D4108, ASTM F2703 ISO 17492:2003,NFPA 1971,NFPA 2112
 Size 1500mm (W) X 540mm (H) X 460mm (D)
 Weight  86KG
 Electrical requirements  220V, 50HZ, 15A
 Gas Source Requirements  Propane and Air Compressor Gas
 Testing environment  25 +5℃

Product detail pictures:

Popular Design for Building Material Flammability Test Machine -
 TPP Thermal Protection Performance Tester – Skyline detail pictures

Popular Design for Building Material Flammability Test Machine -
 TPP Thermal Protection Performance Tester – Skyline detail pictures


Related Product Guide:

We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for Popular Design for Building Material Flammability Test Machine - TPP Thermal Protection Performance Tester – Skyline , The product will supply to all over the world, such as: Oman , Rio de Janeiro , Algeria , High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order to fulfill, please feel free to contact us now. Working with us will save you money and time.
  • We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Jean from Philippines - 2017.09.26 12:12
    We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
    5 Stars By Esther from Jamaica - 2018.02.04 14:13
    Write your message here and send it to us