SL-FL18 Horizontal Flammability Testing Equipment
SL-FL18 ISO 3795 Automotive Interior Horizontal Flammability Testing Equipment
수평 난연성 시험 장비의 제품 소개
수평 난연성 시험기는 비교 화상 비율을 결정하고 섬유의 저항, 자동차 실내 사용을 위해 특히 구울 수 있습니다. 안전하고 작동하기 쉬운 테스터 수평 가연성이 단계는 관찰 창을 무료로 스테인레스 스틸 캐비닛 초안, 샘플 홀더와 도어 버너를 장착.
솔레노이드 제어 밸브 가스 자동 점화 타이머 제어 자동 포함한 가스 및 타이밍 제어 시스템.
수평 난연성 시험 장비 제품 매개 변수
화재 노즐 직경 | 9.5MM |
화재 높이 | 38mm +/- 2 |
샘플 클램프 | 360x100mm |
실내 차원 | 330x50mm |
아래의 샘플 | 금속 와이어 사이 25mm 피치는 25mm이며 |
표시된 라인 | 점화 지점에서 시작 지점 38mm / 종료 지점 292mm |
노즐의 샘플까지의 거리 | 19mm |
힘 | 110분의 220 V 50/60 Hz에서 2 |
무게 | 18kg |
가연성 챔버에 대한 치수 | 381mm × 203mm × 356mm |
치수 | 460 × 200 × 400mm (LXWXH) |
수평 난연성 시험 장비의 제품 특징
이 장치는, 레코딩 난연성 차 유기 물질의 속도를 레코딩 한 후, 인화성에 대한 결정에 적합하다.
Comply with ISO 3795, ASTM D5132, FMVSS 302 etc.
Comprised of draft free stainless steel cabinet with observation window, sample holder and door mounted burner.
Automated control of timing and gas supply.
(1) 연소 시험 상자는 연소 후 변형되기 쉽지 않다 2mm의 벽 두께를 가진 스테인레스 스틸로 제조된다.
2. There are 10 19 mm ventilation holes at the bottom of the box and 13 mm wide ventilation grooves around them.
3. Bunsen lamp burner, nozzle inner diameter 9.5 mm, flame height can be adjusted to 38 mm;
4. The box body is equipped with transparent observation window of toughened glass, which can be easily observed by testers.
5. The bottom of the box is equipped with a collection tray for collecting molten droplets.
6. The U-shaped stainless steel sample clamp can be inserted from the right side of the box body.
7. After inserting U-type stainless steel sample clamp, the instrument can automatically timing.
8. The combustion flame can be cut off automatically after 15 seconds of testing.
9. Provide needle valves and ball valves to adjust and cut off gas.
10. Optional stainless steel sample clamp with heat-resistant metal wire for flexible fabrics.
수평 난연성 시험 장비의 제품 세부 사항
수평 연소 시험기는 자동차 내장재의 연소 성능 시험에 적합합니다. 그것은 GB 8410 및 FMV SS302 등의 기준을 충족
EC 지침 28분의 95 / EC는 자동차의 특정 범주의 내부 건설에 사용되는 재료의 연소 거동에 관한 것으로, 그들이 화재 안전 기준을 충족하는지 확인하기위한 것입니다.
가로 레코딩 동작 수직 연소 동작, 레코딩 놓기의 자동차 내장재의 95 / 28 / EC 화재 시험 레코딩의 특성을 결정한다.
테스트 기준
ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132의, JIS D1201에 1690 BSAU