ISO 8124-4 Horizontal Thrust Tester for Swings and Slide

Short Description:

A horizontal force is simultaneously applied at each suspension point to simulate the horizontal forces created by pendulum effect.


  • Min.Order Quantity: 1 unit
  • Price: Negotiable
  • Package : Plywood Case
  • Model: SL-S158
  • Standard: ISO8124-4 6.1.2/ 6.1.4
  • Product Detail

    Product Tags

    IS 9873-4 /ISO 8124-4 Toys Testing Equipment Horizontal Thrust Tester for Swings and Slide

    Product introduction of the Horizontal Thrust Tester

    A horizontal force is simultaneously applied at each suspension point to simulate the horizontal forces created by pendulum effect.

    Product parameters of the Horizontal Thrust Tester

    Load cell capacity  0-2500N
     Accuracy  +/-0.5%
     Direction   Horizontal
     No of loading advice  4 in total
     Loading Point height  30-180cm
     Motor  4 servo actuators
     Controller  PLC+ Touch screen
     Test frame  Alu.material

    Product Details of the Horizontal Thrust Tester

    Procedure

    Assemble the toy in accordance with the manufacturer's instructions and place or fix it on a rigid horizontal surface. For a free-standing toy, stops may be used to prevent it from slipping on the surface. They shall, however, not prevent the toy from overturning. Swings and other activity toys with crossbeams supplied with removable ground anchors shall be tested with the anchors fixed to the standing surface in accordance with the manufacturer's instructions. On the suspension point(s), simultaneously apply horizontal forces of (500 ± 20) N per user in the swinging direction. Where a swing element has multiple suspension points, distribute the load equally between the points (using Table 3 as a guide). Forces on multiple suspension points shall be applied in the same direction simultaneously. Observe whether the toy tips over


  • Previous:
  • Next:

  • Write your message here and send it to us