ચાઇના એક બર્નિંગ આઇટમ flammability પરીક્ષણ સાધન ઉત્પાદકો અને સપ્લાયર્સ | સ્કાયલાઇન
industrial sewing machine

એક બર્નિંગ આઇટમ flammability પરીક્ષણ સાધનો

લઘુ વર્ણન:

સિંગલ બર્નિંગ આઇટમ (SBI), ઉત્પાદનો (floorings સિવાય) મકાન જ્યારે એક સળગતો આઇટમ (રેતી બોક્સ બર્નર પ્રોપેન સાથે પૂરી પાડવામાં) દ્વારા થર્મલ હુમલો ખુલ્લા ના આગ વર્તન માટે પ્રતિક્રિયા નક્કી કરવા માટે પરીક્ષણ કરવાની એક પદ્ધતિ છે.


  • Min.Order જથ્થો: 1 એકમ
  • કિંમત: વાટાઘાટ
  • પેકેજ: પ્લાયવુડ કેસ
  • મોડેલ: એસએલ-FL080
  • સ્ટાન્ડર્ડ: EN13823, EN 13501
  • ઉત્પાદન વિગતવાર

    ઉત્પાદન ટૅગ્સ

    Single Burning Item Flammability Testing Equipment with Stainless Steel Gas Collecting Hood

    પૂર્ણ ઇન્સ્ટોલ SBI
    પૂર્ણ ઇન્સ્ટોલ SBI
    J પ્રકાર એક્ઝોસ્ટ પાઇપ
    J પ્રકાર એક્ઝોસ્ટ પાઇપ
    ચિમની
    ચિમની
    ટ્રોલી
    ટ્રોલી

    ઉત્પાદન પરિમાણો  the Single Burning Item

     મેઝરિંગ શ્રેણી  0-25%
     સિગ્નલ આઉટપુટ  4-20mA
     પ્રતિભાવ સમય T90  ≤2S;
     આસપાસનું તાપમાન  0-45 ℃;
     સંબંધિત ભેજનું પ્રમાણ  <90% (બિન-ઘટ્ટ)
     linearity  <± 0.1% O2
     ઝીરો ડ્રિફ્ટ  સપ્તાહ દીઠ 0.05% O2
     repeatability  <± 0.02% O2
     કાર્બન ડાયોક્સાઇડ (CO2) માપન  
     મેઝરિંગ શ્રેણી  0-10%
     repeatability  <± 1% નિયંત્રણ કેબિનેટ આંતરિક માળખું;
     ઝીરો ડ્રિફ્ટ  ≤2% / સપ્તાહ
     સ્પાન ડ્રિફ્ટ  ≤2% / સપ્તાહ
     linearity વિચલન  <± 1%
     પ્રતિભાવ સમય  T90≤2 સેકન્ડ

    ઉત્પાદન રજૂઆત  the Single Burning Item

    સિંગલ બર્નિંગ આઇટમ (SBI), ઉત્પાદનો (floorings સિવાય) મકાન જ્યારે એક સળગતો આઇટમ (રેતી બોક્સ બર્નર પ્રોપેન સાથે પૂરી પાડવામાં) દ્વારા થર્મલ હુમલો ખુલ્લા ના આગ વર્તન માટે પ્રતિક્રિયા નક્કી કરવા માટે પરીક્ષણ કરવાની એક પદ્ધતિ છે. નમૂનો એક ટ્રોલી કે જે એક્ઝોસ્ટ સિસ્ટમ નીચે એક ફ્રેમ માં સ્થિત થયેલ છે પર માઉન્ટ થયેલ છે. બર્નર માટે નમૂનો પ્રતિક્રિયા instrumentally અને દૃષ્ટિની નિરીક્ષણ કરવામાં આવે છે. હીટ અને ધુમાડો પ્રકાશન દર instrumentally માપવામાં આવે અને ભૌતિક લક્ષણો નિરીક્ષણ દ્વારા નિર્ધારિત કરવામાં આવે છે.

    ઉત્પાદન લક્ષણ અને અરજી the Single Burning Item

    (SBI) 1.The સિંગલ બર્નિંગ આઇટમ એક ટ્રોલી, એક નિશ્ચિત ફ્રેમ, એક ગેસ એકઠી હૂડ, કલેક્ટર, જે પ્રકાર એક્ઝોસ્ટ પાઇપ, કેન્દ્રત્યાગી પંખો, પવનની ઝડપ નિયંત્રણ ઉપકરણ, વ્યાપક માપ સમાવે કલમ, ગેસ વિશ્લેષણ કેબિનેટ, ડેટા એક્વિઝિશન સિસ્ટમ;
    2.The ટ્રોલી બે લંબરૂપ નમૂના નમુનાઓને સ્થાપિત કરી શકાય છે. ઊભી કોણ તળિયે રેતી બોક્સમાં બર્નર છે. સપાટી ઇગ્નીશન પદ્ધતિ અપનાવવામાં આવે છે, અને જ્યોત શોધ સિસ્ટમ flameout રક્ષણ ઉપકરણ તરીકે સજ્જ છે;
    3.આ નિયત ફ્રેમ ગેસ એકઠી હૂડ ટેકો આપે છે. ફ્રેમ સહાયક બર્નર સાથે નિયત અને flameout રક્ષણ ઉપકરણ તરીકે જ્યોત ડિટેક્ટિંગ સિસ્ટમ સાથે સજ્જ કરવામાં આવે છે;
    4.Stainless સ્ટીલ ગેસ કલેક્ટર, નિયત ફ્રેમ એકત્રિત દહન વાયુઓ માટે વપરાય ટોચ પર સ્થિત;
    5.Stainless સ્ટીલ J પ્રકાર ધુમાડો એક્ઝોસ્ટ પાઇપ, આંતરિક વ્યાસ (315 + 5) 50mm ઊંચા તાપમાન પ્રતિકારક ખનિજ કપાસ ઇન્સ્યુલેશન સાથે એમએમ છે;
    6.The ધુમાડો એક્ઝોસ્ટ સિસ્ટમ કરીશ 0.50m3 ઝડપે સતત એક્ઝોસ્ટ ધૂમાડો / એસ 0.65 મીટર 3 / s હોય છે અને આવર્તન રૂપાંતર દ્વારા નિયમન થાય છે;
    નિયંત્રક પ્રવાહ 7.Mass ના 0 જી / શ્રેણી માપવા એસ 2.5g / s નથી કરતાં ઓછી 1.5% ચોકસાઈ વાંચન;
    8.Gas પુરવઠો આપમેળે પ્રવાહ 647mg / s અને 2000mg / s, ગેસ નિયંત્રણ સિસ્ટમ પરીક્ષણ ફેરફારો પ્રક્રિયા ગેસ પુરવઠો ઝડપ ખાતરી આપી શકે 5mg / s વધી ન જોઈએ ગરમી આઉટપુટ ખાતરી કરવા માટે દર નિયંત્રિત કરી શકાય છે 30.7 + 2kW;
    9.The ુ ગેસની નમૂના સિસ્ટમ રાખ ફિલ્ટર, એક ઠંડી છટકું, બે સૂકવણી કૉલમ, એક નમૂના પંપ અને peristaltic પંપ ધરાવે છે, જેથી અસરકારક રીતે તરીકે નમૂના ગેસ સ્વચ્છ અને સૂકા કરો;
    10.Paramagnetic ઓક્સિજન વિશ્લેષક, 0-25% ની રેન્જમાં માપવા ગેસ ઓક્સિજન એકાગ્રતા માપવા 0-25% ની એકાગ્રતા શ્રેણી, T90 <12 સેકન્ડમાં; નોન dispersive ઇન્ફ્રારેડ CO2 ના વિશ્લેષક: CO2: 0 ~ 10%;
    2155mm ની લંબાઈ, એક દબાણ ચકાસણી ત્રણ થર્મોકપલ્સ, ગેસ નમૂના ચકાસણી, અને સફેદ પ્રકાશ સિસ્ટમ સાથે સજ્જ સાથે 11.A પાઇપલાઇન;
    12.Two-વે ચકાસણી ઓછામાં ઓછું (0-100) ની શ્રેણી સાથે પે અને ચોકસાઈ 2Pa ઇનલેટ દબાણ સેન્સરના જોડાયેલું છે. દબાણ સેન્સર 90% આઉટપુટના પ્રતિભાવ સમય સૌથી 1 સે છે;
    13.The પ્રકાશ સિસ્ટમ, અગ્નિથી પ્રકાશિત પ્રકાર છે (2900 + 100) કેવલી રંગ તાપમાન સાથે અને લવચીક સંયુક્ત એક્ઝોસ્ટ પાઇપ બાજુ પર સ્થાપિત થયેલ છે;
    14.Silicon photodiode ડિટેક્ટર, 0.1% સ્થિરતા રેખીય સાથે;
    15.The હવા ઓપ્ટિકલ ઉપકરણ છે, જેનો કોમ્પ્રેસ્ડ એર દ્વારા પરિપૂર્ણ કરી શકાય છે સ્વચ્છતા જળવાઈ રહે તેવી બાજુ નળીઓમાં પરિચય થાય છે;
    Application:It is suitable for the testing the fire resistance of building materials / products in single burning item (SBI).

    ના ઉત્પાદન વિગતો  the Single Burning Item
    સ્ટેનલેસ સ્ટીલ કેન્દ્રત્યાગી ચાહક 300 ડિગ્રી તાપમાન સામે ટકી શકે પગલું કેલિબ્રેશન ઊંચા તાપમાન જરૂરિયાતો મળે છે;
    Diaphragm pump, flow rate: 400l / h, high temperature and corrosion resistance, used for sample gas collection;
    The soot filter filter head is composed of solid PTFE with 0.5 um filter material inside;
    Compressor condenser, cooling capacity 320KJ / h, dew point stability of 0.1 degrees, dew point static change of 0.1K, protection grade IP20;
    Imported rotameter with a range of 0-5L/min to adjust the inlet flow of the analyzer;
    Non-dispersive infrared CO2 analyzer: CO2: 0~10%;
    A comprehensive measuring section with a length of 2155mm, equipped with a pressure probe, three thermocouples, a gas sampling probe and a white light system;
    a gas sampling probe connected to the gas regulating device and the O2, CO2 inlet gas analyzer;
    The light attenuation system is an incandescent light type, and is mounted on the side pipe of the exhaust pipe by a flexible joint;
    A lens system for collecting light into a parallel beam of at least 20 mm in diameter. The light-emitting hole of the phototube should be located at the focus of the lens in front of it, and its diameter (d) should be determined according to the focal length (f) of the lens such that d/f is less than 0.04;
    Detector and silicon photodiode probe, the photoelectric detection chamber has 0.1% linear stability, 10-bit measurement range, and the spectral distribution responsivity of the silicon photodiode is consistent with CIE (lighting curve), and the standard function V(γ) can reach at least ±5% accuracy;
    The 90% response time of the optical attenuation system should not exceed 3s;
    Introducing air into the side tube to maintain the optical device in compliance with the required attenuation of light attenuation drift, which can be accomplished using compressed air;

    સોફ્ટવેર ની ખાસિયત

    નીચેના કેલિબ્રેશન અને કામગીરી ઈન્ટરફેસ પૂરું પાડે છે:
    O2/CO2 analyzer calibration: O2/CO2 output noise and drift calibration
    Calibration of optical systems: noise and drift calibration of smoke measurement systems
    Optical system calibration: filter calibration
    Air volume calibration: air volume control range calibration
    Ladder calibration and heptane calibration

    હીટ આઉટપુટ નિસરણી માપાંકન નીચેની જરૂરીયાતોને પહોંચી વળવા:
    O2 / CO2 ના વિશ્લેષક ના વિલંબ સમય 30 કરતાં વધુ છે;
    The response time of the O2/CO2 analyzer is not more than 12s;
    The response time of the burner switch is not more than 12s;
    The temperature response time shall not exceed 6s;
    The ratio Q gas 30s (T) /HRR30s (T), (T) should be continuous (100 + 5)%;
    The difference between the average of HRR step 2 and the average of HRR step 3 is not more than 0.5kW.

    Heptane કેલિબ્રેશન પરિણામો:
    એકમ સમૂહ ગુણવાળા heptane THR / મીટર હોવી જોઇએ (4456 + 222.8) એમજે / કિલો;

    Testing results: 
    ઉષ્મા મુક્તિ સરેરાશ દર [RHRav (T)]
    Total Heat Release[THR(t)]
    1000 * [RHRav(t)/(t-300)]
    Fire Growth Rate Index[FIGRA]
    Total Heat Release[THR600s]
    Occurrence of Lateral Flame Spread
    RSPav(t)
    Total Smoke Production[TSP(t)]
    10000 * [RSPav(t)/(t-300)]
    Smoke Growth Rate Index[SMOGRA]
    Total Smoke Production[TSP600s]
    Standard:EN 13501,EN 13823
    Dimension: 3000 mm (W) x 4500 mm (H) x 3000 mm
    Weight: 650kg

    સ્થાપન જરૂરીયાતો:
    સ્થાપન ઊંચાઈ: કોઈ 5 કરતાં ઓછી મીટર
    Floor area: no less than 3m X 3m
    પાવર જરૂરીયાતો: 220V, 10A; 380V, 5KW
    એમ્બિયન્ટ તાપમાન: 10 ° સે થી 35 ° સે
    ગેસ જરૂરીયાતો: પ્રોપેન ગેસ
    માપાંકન ગેસ: N2, CO2 ના ધોરણ ગેસ
    Calibration standard: heptane


  • ગત:
  • આગામી:

  • તમારો સંદેશ અહીં લખો અને અમને મોકલી
    industrial sewing machine