Good Quality Pen-Core Circle Writing Tester - Spread of Flame Tester – Skyline

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Steel Ball Dropping Impact Tester , En1363 Durable Flammability Testing Equipment, Single Cable Vertical Flame Tester Chamber , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Good Quality Pen-Core Circle Writing Tester - Spread of Flame Tester – Skyline Detail:

Spread of Flame Tester With Computer and standard test software control

Product Introduction of Spread of Flame Tester

Sprea of flame tester is used to evaluate combustion characteristics of rail materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire testsSpread of flame- Part 2 Lateral spread on building products in vertical configuration) and measures combustion characteristics of vertical specimen (155mmX800mm).
​ISO 5658-2 : Reaction to fire tests Spread of flame – Part 2 Lateral spread on building products in vertical configuration
IMO Resolution A. 653(16): Recommendation on fire test procedures for flammability of bulkhead, ceiling and deck finish materials
​ASTM E 1317 : Standard test method for flammability of marine surface finishes

Product parameters of Spread of Flame Tester


 2200 mm (W) x 2120 mm (H) x 1100 mm (D)



 Electricity requirements

 220 V, 10 Amps

 Ambient temperature

 10°C to 35°C

 Calibration gas


 Combustion gas

 propane or methane


 ISO 5658-2-2006、CSN EN 45545-2+A1:2015、

 IMO FTPC Part 5, IMO Res.A.653 (16)、


 rail transit, shipping materials, other fields

Product Performance characteristics of Spread of Flame Tester

1. The test instrument consists of four main components: a set of radiation plate brackets and a set of sample brackets, which are connected together to form the required structure with radiation plate, sample bracket and ignition burner.
2. The radiation plate provides a radiation surface of about 480 mm X 280 mm, and the metal screen is provided on the radiation front to increase the radiation.
3. Air source of radiation plate is provided by blower, and frequency converter is used to regulate it.
4. Use propane mass flow controller to regulate gas source, cooperate with Venturi mixer, mix with air, and provide combustion gas source for radiation plate.
5. Providing a porous calibration plate and moving track of a sliding heat flow meter can detect whether the heat radiation flux meets the requirements of the standard.
6. Water-cooled heat radiation flux sensor, which is used to measure the heat radiation flux curve of radiation plate.
7. Portable water cooling circulating device can take away the surface heat of heat flow meter.
8. The ceramic tube burner can directly act on the surface of the test sample by open fire.
9. Rotor flowmeter can provide mixed combustion gas for ceramic tube burner.
10. Mass flow controller can easily measure the heat of methane by measuring the critical heat flux.
11. According to IMO test standards, thermocouple devices can be provided to measure heat release rate and other related parameters.
12. The methane calibration burner and methane mass flow controller can provide 1KW and 3KW flame temperature.
13. During the test, the camera can observe and save the measurement state in the program.
14. Equipped with an angle-adjustable observation mirror, the flame spreading rate can be observed through glass mirror and sample rake during the test, and can be recorded automatically by foot switch.
15. Computer and standard test software are used to control the test process.

Product Feature of Spread of Flame Tester
The apparatus consists of a radiant panel having dimensions of 280 x 483 mm, mounted vertically, and making an angle of 15° with the specimen.
​The orientation of the panel results in an incident radiant flux that decreases from 50 kW/m² at one end to approximately 1 kW/m² at the other end of the specimen.
​The sample is ignited by a non-impinging, gas/air pilot flame.
​Viewing rakes placed at a 50-mm spacing along the specimen.
​Heat Flux Meter – for setting the irradiance level at the surface of the specimens, the range from 0-50KW/m2.
​Portable water cooling system without need for waterworks and plumbing when using the Heat Flux meter.
​The radiant burner system is fully automatic, with spark ignition and safety interlocks.
​MFC (Mass Flow Controller) to easily measure the heat amount of methane gas in measuring critical heat flux.
​Camcorder to observe and save test conditions in a program during tests.
To meet the IMO specification a stack is fitted complete with thermopile for estimating heat release rate.
​Records the spread rate of flame after this records ignition and extinguishment time of flame for each distance of specimens. And the other test results is Heat for ignition (MJ/㎡), Heat for sustained burning (MJ/㎡), Critical flux at extinguishment (kW/㎡), Average heat for sustained burning (MJ/㎡), Total heat release (kW),Peak heat release rate (kW) .


Product detail pictures:

Good Quality Pen-Core Circle Writing Tester -
 Spread of Flame Tester – Skyline detail pictures

Good Quality Pen-Core Circle Writing Tester -
 Spread of Flame Tester – Skyline detail pictures

Good Quality Pen-Core Circle Writing Tester -
 Spread of Flame Tester – Skyline detail pictures

Related Product Guide:

Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for Good Quality Pen-Core Circle Writing Tester - Spread of Flame Tester – Skyline , The product will supply to all over the world, such as: azerbaijan , Doha , Greenland , Upon today, we have customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to provide the highest quality products with best price. We are looking forward to doing business with you.
  • The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Mignon from Lahore - 2018.12.10 19:03
    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Denise from Albania - 2017.08.16 13:39
    Write your message here and send it to us