Factory Free sample Building Materials Fire Analyzer - TPP Thermal Protection Performance Tester – Skyline

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our mission is usually to turn into an innovative provider of high-tech digital and communication devices by furnishing benefit added design and style, world-class manufacturing, and service capabilities for Steel Ball Dropping Impact Tester , Flame Propagation Tester , Fire Test Machine , For more information, please send email to us. We are looking forwards the opportunity to service you.
Factory Free sample Building Materials Fire Analyzer - TPP Thermal Protection Performance Tester – Skyline Detail:

TPP Thermal Protection Performance Tester High-precision Including Automatic Data Acquisition System

Product introduction of the TPP Thermal Protection Performance Tester

TPP thermal protective performance tester is mainly used to test the thermal insulation performance of flame retardant protective clothing fabric exposed to radiation and convective heat sources. It is used to test the thermal protective performance of protective clothing, safety shoes, gloves, helmet exterior surface, etc.The testing standards of NFPA 1971, ASTM D4018, GB 8965.1-2009, ISO 17492, etc.

Performance characteristics of the TPP Thermal Protection Performance Tester

1. The test instrument shall include the sample base assembly, the support of the sample base assembly, the heat source, the shield, the sensor assembly, the recorder and the gasket. It shall also have the gas source, the gas flowmeter, the burner and the sensor.
2. Movable corundum protective plate, with temperature resistance of 1800 degrees, can shield flame and reduce test error.
3. Two Meker burners with 45 degrees are installed to provide standard convective heat source with 9 quartz tubes.
4. The diameter of Meker burner is 38 mm and the diameter of inner hole is 5/16 inches. It can provide 800-1200 BUT heat output. The burner mouth is a metal mesh structure. The lower air valve of the burner can be adjusted and the mixing ratio of air and combustible gas can be adjusted.
5.Five or nine T150 quartz infrared tube arrays can provide thermal radiation flux of 13-40 kW/㎡±4 kW/㎡
6. Under the thermal radiation of quartz infrared tube, the total heat flux can be set to 83 kW/㎡±2 kW/㎡ by adjusting the gas supplied to Meker burner.
7. The calibrated heat flow meter is water-cooled, and its working range is 0-100KW/m2, and its maximum usage range is 150%.
8. The response time of the heat flow meter is less than 200 ms, the radiation rate is more than 0.95, and the output signal is more than 5 mV in the working range.
9. Copper plate calorimeter can be used to detect convective heat and radiation heat, as well as the temperature on the back of the sample.
10. Rotor flowmeter can adjust the flow rate of combustion gas, the accuracy is (±2%) and the measuring range is more than 3L/min.
11. Pointer pressure gauge, intake pressure can be adjusted by pressure relief valve, the range of pressure relief valve is 0-15 psi;
12. A quarter rotary plug can cut off the flammable gas manually.
13. The resolution of the temperature acquisition system is 0.1C and the accuracy is ±0.75 ℃
14. The data acquisition speed of the automatic data acquisition system is sub/0.05 seconds, and the cold-end compensation is provided for the measured data of the thermocouple.
15. Equipped with computers and printers, with standard test software, to provide standard test curves.

Product parameters of the TPP Thermal Protection Performance Tester

 Standard  ASTM D4108, ASTM F2703 ISO 17492:2003,NFPA 1971,NFPA 2112
 Size 1500mm (W) X 540mm (H) X 460mm (D)
 Weight  86KG
 Electrical requirements  220V, 50HZ, 15A
 Gas Source Requirements  Propane and Air Compressor Gas
 Testing environment  25 +5℃

Product detail pictures:

Factory Free sample Building Materials Fire Analyzer -
 TPP Thermal Protection Performance Tester – Skyline detail pictures

Factory Free sample Building Materials Fire Analyzer -
 TPP Thermal Protection Performance Tester – Skyline detail pictures


Related Product Guide:

We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Factory Free sample Building Materials Fire Analyzer - TPP Thermal Protection Performance Tester – Skyline , The product will supply to all over the world, such as: Los Angeles , Guatemala , Peru , With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
  • In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
    5 Stars By Andrew from Egypt - 2018.07.26 16:51
    The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Cheryl from French - 2017.11.11 11:41
    Write your message here and send it to us