Sola Burning Item inflamabilidad Testing Equipment
Single Burning Item Flammability Testing Equipment with Stainless Steel Gas Collecting Hood
Produkta parametroj de the Sola Burning Ero
mezuri gamo | 0-25% |
signalo produktado | 4-20mA |
Tempo de respondo T90 | ≤2S; |
ĉirkaŭa temperaturo | 0-45 ℃; |
relativa humido | <90% (ne-condensando) |
La lineara | <± 0,1% O2 |
nulo drift | 0.05% O2 je semajno |
Ripeteblo | <± 0,02% O2 |
Karbona dioksido (CO2) mezurado | |
mezuri gamo | 0-10% |
Ripeteblo | <± 1% interna strukturo de la kontrolo kabineto; |
nulo drift | ≤2% / semajno |
span drift | ≤2% / semajno |
La lineara devio | <± 1% |
tempo de respondo | T90≤2 sekundoj |
Produkta enkonduko de la Sola Burning Ero
La Sola Burning Ero (SBI), estas metodo de provo por determini la reago al fajro konduto de konstruado produktoj (ekskludante floorings) kiam elmontritaj al la termika atako por sola brulanta elemento (a sablo-kesto brulilo provizita kun propano). La espécimen estas muntita sur trolley ke posiciona en kadro sub la sistemo de ellasilo. La reago de la espécimen al la brulilo estas monitoritaj instrumentalmente kaj vide. Varmo kaj fumo eldono indicoj estas mezurita instrumentalmente kaj fizikaj karakterizaĵoj estas taksitaj fare de observado.
Produkta Karakterizaĵo kaj Apliko de la Sola Burning Ero
1.The Ununura Burning Ero (SBI) konsistas en trolley, fiksa kadro, gaso kolekti kapuĉo, kolektanto, J tipo tubo de ellasilo, centrifuga adoranto, vento rapido kontrolo aparato, la ampleksa mezurado sekcio, gaso analizo kabineto, datumoj akiraĵo sistemo;
2.The trolley povas esti instalita kun du vertikala specimeno specimenoj. La fundo de la vertikala angulo estas sablo skatolo brulilo. La surfaco sparkado metodo estas adoptita, kaj la flamo malkaŝo sistemo estas ekipita kiel flameout protekto aparato;
3.The fiksita kadro subtenas la gaso kolekti kapuĉo. La kadro estas fiksa kun helpa brulilo kaj ekipita kun flamo Eltrovanta sistemo kiel flameout protekto aparato;
4.Stainless ŝtalo gaso kolektanto, lokita en la pinto de la fiksa kadro, uzata por kolekti brulado gasoj;
5.Stainless ŝtalo tipo J fumo tubo de ellasilo, la interna diametro estas (315 + 5) mm kun 50mm alta temperaturo imuna minerala kotono izolaĵo;
6.The fumo sistemo de ellasilo faros kontinue ellasilo fumo al la rapido de 0.50m3 / s-0,65 m 3 / s, kaj estas reguligita de frekvenco konvertiĝo;
7.Mass fluas regilo, mezuri gamo de 0g / s-2.5G / s, legante precizeco de ne malpli ol 1.5%;
8.Gas provizo povas esti aŭtomate kontrolita flui indico de 647mg / s kaj 2000mg / s, la gaso kontrolo sistemo povas garantii la rapido de gaso provizo en la procezo de provo ŝanĝoj devus superi 5mg / s, por certigi la varmego eligo de 30.7 + 2kW;
9.The Fumgaso muestreo sistemo konsistas frakseno filtrilon, malvarman kaptilon, du sekigita kolumnoj, specimeno pumpilo kaj peristaltaj pumpilo, por efike realigi specimeno gaso pura kaj seka;
10.Paramagnetic oksigeno analizilo, mezurante gamo de 0-25%, mezurante oksigeno koncentriĝo en la gaso, la koncentriĝo gamo de 0-25%, T90 <12 sekundoj; Ne dispersivo transruĝa CO2 analizilo: CO2: 0 ~ 10%;
11.A dukto kun longitudo de 2155mm, ekipita kun premo sondas, tri termopares, gaso specimenigo sondas, kaj blanka lumo sistemo;
12.Two unudirekta sondas, kun la gamo de minimume (0-100) Pa kaj precizeco de 2Pa eniro premo sensor konektita. La tempo de respondo de la premo sensor 90% produktado estas maksimume 1s;
13.The lumo sistemo estas inkandeska tipo, kun (2900 + 100) K koloro temperaturo kaj la fleksebla artiko estas instalita sur la flanko de la tubo de ellasilo;
14.Silicon photodiode detektilo, kun 0,1% lineara stabileco;
15.The aero estas enkondukita en la flanko tubon por subteni la pureco de la optika aparato, kiu povas esti plenumita de kunpremita aero;
Application:It is suitable for the testing the fire resistance of building materials / products in single burning item (SBI).
Plej Informoj de la the Sola Burning Ero
Neoksidebla ŝtalo centrifuga ventumilo, povas rezisti temperaturo de 300 gradoj, renkontas la postulojn de paŝo calibración alta temperaturo;
Diaphragm pump, flow rate: 400l / h, high temperature and corrosion resistance, used for sample gas collection;
The soot filter filter head is composed of solid PTFE with 0.5 um filter material inside;
Compressor condenser, cooling capacity 320KJ / h, dew point stability of 0.1 degrees, dew point static change of 0.1K, protection grade IP20;
Imported rotameter with a range of 0-5L/min to adjust the inlet flow of the analyzer;
Non-dispersive infrared CO2 analyzer: CO2: 0~10%;
A comprehensive measuring section with a length of 2155mm, equipped with a pressure probe, three thermocouples, a gas sampling probe and a white light system;
a gas sampling probe connected to the gas regulating device and the O2, CO2 inlet gas analyzer;
The light attenuation system is an incandescent light type, and is mounted on the side pipe of the exhaust pipe by a flexible joint;
A lens system for collecting light into a parallel beam of at least 20 mm in diameter. The light-emitting hole of the phototube should be located at the focus of the lens in front of it, and its diameter (d) should be determined according to the focal length (f) of the lens such that d/f is less than 0.04;
Detector and silicon photodiode probe, the photoelectric detection chamber has 0.1% linear stability, 10-bit measurement range, and the spectral distribution responsivity of the silicon photodiode is consistent with CIE (lighting curve), and the standard function V(γ) can reach at least ±5% accuracy;
The 90% response time of the optical attenuation system should not exceed 3s;
Introducing air into the side tube to maintain the optical device in compliance with the required attenuation of light attenuation drift, which can be accomplished using compressed air;
Programaro Karakterizaĵo
Provizi la jenaj calibración kaj operacio interfaco:
O2/CO2 analyzer calibration: O2/CO2 output noise and drift calibration
Calibration of optical systems: noise and drift calibration of smoke measurement systems
Optical system calibration: filter calibration
Air volume calibration: air volume control range calibration
Ladder calibration and heptane calibration
Varmeco produktadon ŝtupetaro calibración kunvenas la sekvajn kondiĉojn:
La prokrasto tempo de la Aŭ2 / CO2 analizilo ne pli ol 30s;
The response time of the O2/CO2 analyzer is not more than 12s;
The response time of the burner switch is not more than 12s;
The temperature response time shall not exceed 6s;
The ratio Q gas 30s (T) /HRR30s (T), (T) should be continuous (100 + 5)%;
The difference between the average of HRR step 2 and the average of HRR step 3 is not more than 0.5kW.
Heptano calibración rezultoj:
La calorífica valoron de unuo maso Heptano estu THR / m (4456 + 222.8) MJ / kg;
Testing results:
Averaĝa rapideco de varmo eldono [RHRav (t)]
Total Heat Release[THR(t)]
1000 * [RHRav(t)/(t-300)]
Fire Growth Rate Index[FIGRA]
Total Heat Release[THR600s]
Occurrence of Lateral Flame Spread
RSPav(t)
Total Smoke Production[TSP(t)]
10000 * [RSPav(t)/(t-300)]
Smoke Growth Rate Index[SMOGRA]
Total Smoke Production[TSP600s]
Normo: EO 13501, EO 13823
Dimensio: 3000 mm (W) x 4500 mm (H) x 3000 mm
Pezo: 650kg
Instalado postuloj:
Instalado alteco: ne malpli ol 5 metroj
Floor area: no less than 3m X 3m
Potenco postuloj: 220V, 10A; 380V, 5KW
Ĉirkaŭa temperaturo: 10 ° C al 35 ° C
gaso postuloj: propano gaso
Calibration gaso: N2, CO2 norma gaso
Calibration standard: heptane