Dynamic Strength Tester
IS9873 Toy Dynamic Testing Equipment , Strength Testing Machine For Wheeled Ride On Toys
Product introduction of the Toys Dynamic Strength Tester
This instrument is mainly used for test the proformance of rides at the speed of toys 2m / s to strike 50x50mm obstruct. The machine simulation children riding tricycle operation state, put on the load on the sample and use 2 m/s speed to strike a piece of 50 x50mm obstacles block.After testing to check sample structure and performance if are in good condition or not
Product parameters of the Toys Dynamic Strength Tester
| Conveyor belt speed | 2m/s |
| Dimensions | 153x450x156cm |
| Weight | 900kg |
| Standards | EN71-1-2011-8.22 ASTM F963, clause 8.20 ISO 8142-1-2012-5.27 |
| Accessories | Load ALoad B |
Product Feature and Application of the Toys Dynamic Strength Tester
A load is secured to the toy, and articulated arms with the elbow joints in a downward position are attached to
the steering wheel or handlebars if the toy is so equipped. The toy is driven three times into a non-resilient
step.
Determine whether the toy continues to conform to relevant requirements of this European Standard.
Product Details of the Toys Dynamic Strength Tester
Testing Standards
EN-71 ISO 8124
25kg Load Weight , 50kg Load Weight
