Single Cable Vertical Flame Test Equipment
Single Insulated Wire and Cable Vertical Flame Test Equipment
Product Description of the Wire and Cable Vertical Flame Test Equipment
IEC 60332 Single Insulated Wire or Cable Vertical Flammability Tester is used for conductor diameter greater than 8mm (cross-sectional area greater than 0.5mm2) or less than 8mm (cross-sectional area less than 0.5mm2) of the single wire and cable flammability assessment. It is suitable for the research, production and quality inspection departments of electrical and electronic products and components such as lighting equipment, low voltage electrical appliances, household appliances, machine tools, electrical appliances, electric tools, electronic instruments, electrical instruments, electrical connectors and accessories. In line with IEC 60332.
Product parmeters of the Single Cable Vertical FlameTest Equipment
| Burner | Inner diameter Φ9.5mm ± 0.5mm |
| Test inclination angle | 45° style beam can move back and forth, adjust the position of the Bunsen burner according to the Specimen thickness; |
| Flame height | 20mm ± 2mm to 190mm ± 1mm adjustable |
| Flame time | 0-999.9s ± 0.1s adjustable |
| Combustion gas | 95% propane gas (usually replaced by liquefied petroleum gas) |
| Gas | high-purity propane gas or liquefied petroleum gas (user-supplied) |
| The length of the tested wire and cable | 600±25mm |
| Burning torch standard power | 1KW |
| Supply voltage | 220V/50Hz |
| Gas flow | 0-1L/min |
| Air flow | 1.5-15L/min |
| Box material | steel electrostatic spraying |
| Dimensions | length 60 cm wide 45 cm high 156 cm |
Application
Tests on electric and optical fiber cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 KW pre-mixed flame
Product Specifications of the Wire and Cable Vertical Flame Test Equipment
Outside diameter of wire and cable tested: conductor diameter greater than 0.8mm or cross-sectional area greater than 0.5mm2
The device should be placed in an unventilated and temperature (23±10)°C environment
Test Standards
IEC60332 MT818 MT386 ISO5656
