Blanket Flammability Tester
Blanket Flammability Tester for Detecting the Flame Retardant Properties of Bed Blanket Fabric
Product introduction of the Blanket Flammability Tester
ASTM D4151 Standard provides a means to identify blanket fabrics which ignite easily and propagate flame across the surface.
This test method specifies the procedures described in the \\\"Voluntary Blanket Flammability Standard\\\" which has been used by the blanket industry in the United States since 1972.
Product Parameters of the Blanket Flammability Tester
1.Determine the burning characteristics of Blanket fabrics under controlled conditions.
2.Stainless steel test cabinet with glass observation panel.
3.Provided with automatic timing of flame spread in 0.1 second increments from ignition.
4.Automatic flame impingement.
5.Brushing Device including Nylon Brush is available per request.
Product Feature and Application of the Blanket Flammability Tester
1.Stainless steel cabinet with transparent viewing window;
2.18-gauge needle flame with adjustable flame length;
3.The ignition time can be set freely;
4.The timer accuracy is 0.01 seconds;
5.Providing a bristle device and a sample holder;
6.Standard stainless steel sample holders are available.
Product Details of the the Blanket Flammability Tester
The Blanket Flammability Tester is used for detecting the flame retardant performance of the bed blanket fabric and the flame spread property of the fabric surface. The test method is to burn the surface of the sample with a standardized flame within a prescribed time, thereby burning and destroying the standard test paper. The extent or discoloration was observed and the test fabric was graded.
Dimension :420mm (W) x 526mm x (H) x 260mm (D)
Electrical: 110 to 230 V, 50HZ
Ambient Temperature: Operating 21°C