Bite Tester

Short Description:

Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period.


  • Min.Order Quantity: 1 unit
  • Price: Negotiable
  • Package : Plywood Case
  • Model: SL-S06
  • Standards: ASTM F963, 16CFR 1500.52C
  • Product Detail

    Product Tags

    16CFR 1500.52C Toys Testing Equipment Stainless Steel Bite Test Clamp

     Product introduction of the Bite Tester

    Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp edges / small parts.

    Product parameters of the Bite Tester

     Material  stainless steel
     Dimension  89*42*47mm
     Standards  ASTM F963, 16CFR 1500.52C

    Product Feature and Application of the Bite Tester
    Simulates a child's teeth and is used to test the ability of the protruding parts and accessories of the toy surface to withstand bites.

    Product Details of the Bite Tester
    Test method and judgment result:
    1.The sample must be placed in an environment with a room temperature of 23 ± 2 degrees and a humidity of 20% to 70% for 4 hours before performing the bite force test;
    2.Place the test component into the bite tester at a depth of at least 0.25 ft in place and reach the required number of pounds in 5 seconds for 10 seconds;
    3.Requirements: US standard: (0 to 18 months: 25 ± 0.5 LBS; 18 to 36 months: 50 ± 0.5 LBS; 36 to 96 months: 100 ± 0.5 LBS);
    4.Judgment: This test does not require a judgment and only needs to make a test record.


  • Previous:
  • Next:

  • Write your message here and send it to us