45° Flammability Tester
45° Flammability Tester for Flame Retardant Testing of Textiles and Garments
Product introduction of the 45° Flammability Tester
16 CFR 1610 Flammability test provides methods of testing the flammability of clothing and textiles intended to be used for clothing, establishes three classes of flammability, sets forth the requirements which textiles shall meet to be classified, and warns against the use of those textiles which have burning characteristics unsuitable for clothing.
Product parameters of the 45° Flammability Tester
| Time Display | 0-99.9S |
| Test box | 37cm*22cm*35cm, top 12 vents with a diameter of 12.7mm |
| Sample holder | 45° |
| Sample holder | upper plate slotted 38mm*152mm |
| Sample size | 50mm*150mm |
| Bristle load | 150gf |
| Resolving Capability | 0.1S |
| Ignition time | 1s or set it Set arbitrary |
| Dimensions | 420 x 260 x 520mm (L*W*H) |
| Power | AC 220V / 50Hz / 2A |
| Standards | ASTM D1230, CRF 16-1610 |
| Weight | 20kg |
Product Feature and Application of the 45° Flammability Tester
1.Stainless steel cabinet with transparent viewing window;
2.No. 26 needle flame, adjustable flame length;
3.Automatically record burn time and burn rate;
4.The ignition time can be set freely;
5.The timer accuracy is 0.1 second;
6.Providing a bristle device and a sample holder;
7.Provide standard stainless steel sample holders;
8.Provide a standard flame calibration template;
9.Different standard clamps can be used to meet different standards.
Product Details of the 45° Flammability Tester
1.Determine the burning characteristics of textiles under controlled conditions.
2.Stainless steel test cabinet with glass observation panel.
3.Provided with automatic timing of flame spread in 0.1 second increments from ignition.
4.Automatic flame impingement for 1,5 or 20 seconds.
5.Brushing Device including Nylon Brush is available per request.
Electrical: 110 to 230 V, 50HZ
Ambient Temperature: Operating 21°C
Gas: Butane
