Inaro ina ndán
Vertical Flame Tester The Insulating Glove Fire Resistance Test
Product introduction of the Vertical Flame Tester
Ni ibamu si GB / T 17622-2008 ati EN 60903 awọn insulating ibowo iná resistance igbeyewo ẹrọ ti wa ni idagbasoke, ti o jẹ o dara fun ifiwe iṣẹ insulating ibọwọ ina resistance igbeyewo.
Performance characteristics of the Vertical Flame Tester
1. Standard stainless steel box with transparent observation window can detect flame spread rate in time.
2. One stopwatch timer and one ignition device each.
3. Needle valve regulates the height of flame.
4. The burner is fixed on the sliding track for easy operation. The needle valve can adjust the flame height.
5. Equipped with ASTM D5025 standard Bunsen lamp with inner diameter of 9.5 mm (+0.3 mm), the flame temperature and height can be adjusted.
6. Equipped with GB/T 17622-2008 6.6.2 standard stainless steel sample stand two;
7. Equipped with flame height gauge.
Ọja parameters of the Vertical Flame Tester
ohun elo | Abo Idaabobo |
Standards | AQ 6103, EN 60903: 2003 |
apa miran | 500mm (W) X 550mm (H) X 300mm (D) |
àdánù | 19 KG |
Electrical awọn ibeere | 220V, 50HZ, 3A |
Environmental ibeere | Otutu (20 + 2) ìyí C, ọriniinitutu (65 + 5)% |
gaasi awọn ibeere | propane |