Single ສາຍຕັ້ງ Flame Tester
Single Cable Vertical Flame Tester for Vertical Flame Spread Test
ແນະນໍາຜະລິດຕະພັນຂອງ Single Cable Vertical Flame Tester
ສາຍ Single ຕັ້ງ Flame Tester ຖືກນໍາໃຊ້ສໍາລັບການຂະຫຍາຍພັນ flame ຕັ້ງຂອງສາຍ insulated ດຽວຫຼືສາຍແມ່ນການທົດສອບ bench ຂະຫນາດການກໍານົດການຕໍ່ຕ້ານການສາຍດຽວທີ່ຈະເປັນຄໍາຮ້ອງສະຫມັກ flame 1kW. ມັນສອດຄ່ອງກັບ IEC60332-1-2 (ການຂະຫຍາຍພັນ flame) ແລະ IEC60332-1-3 (ທົດສອບສໍາລັບ flaming droplets).
ຕົວກໍານົດການຜະລິດຕະພັນຂອງ Single ສາຍຕັ້ງ Flame Tester
1. Stainless steel box, the height of 1300mm, width of 300mm, depth of 450mm.
2. Two stainless steel rods, can bind single wire cable or optical cable sample.
3. 1KW mixed standard burner, can provide the standard test fire source.
4. Regulating gas and air flow rate of the rotor flow meters.
5. Pressure gauge and pressure relief valve to ensure that the pressure output is 0.1MPA.
ຄຸນນະສົມບັດຜະລິດຕະພັນແລະການນໍາໃຊ້ຂອງ Single ສາຍຕັ້ງ Flame Tester
1. Electric spark ignition device.
2. Flame height measuring tool.
3. Up to four time modes can be selected according to different sample diameters.
4. Calibration kit for the testing flame.
ຄໍາຮ້ອງສະຫມັກ: ສາຍດ່ຽວແລະສາຍການເຜົາໄຫມ້ tester ການທົດສອບການແຜ່ກະຈາຍ flame ຕັ້ງຂອງສາຍດຽວແລະສາຍໄຍສາຍແກ້ວນໍາແສງ, ແລະກວດສອບການເຜົາໄຫມ້ຂອງນ້ໍາຫຍົດໃນເງື່ອນໄຂ flame.
ລາຍລະອຽດຜະລິດຕະພັນຂອງ ຂອງ Single ສາຍຕັ້ງ Flame Tester
ມາດຕະຖານ:
GB / T 18380,1 ~ 2: 2011, GB / T 18380,11 ~ 13: 2008
IEC 60332-1-1 ~ 3: 2004
ມິຕິ: 560 mm (W) x 380 mm (D) x 1400 mm (H)
ນ້ໍາຫນັກ: 36kg
ຄວາມຕ້ອງການການຕິດຕັ້ງ
ຄວາມຕ້ອງການພະລັງງານ: 220V, 5A
ອຸນຫະພູມອາກາດລ້ອມຮອບ: 10 ° C ເຖິງ 35 ° C
ຄວາມຕ້ອງການອາຍແກັດ: propane ອຸດສາຫະກໍາ, ຜ້າອາກາດ