Vètikal flanm dife tèsteur
Vertical Flame Tester The Insulating Glove Fire Resistance Test
Product introduction of the Vertical Flame Tester
Dapre GB / T 17622-2008 ak EN 60903 se gan dife aparèy la posibilite tès rezistans devlope, ki se apwopriye pou ap viv travay posibilite gan tès rezistans dife.
Performance characteristics of the Vertical Flame Tester
1. Standard stainless steel box with transparent observation window can detect flame spread rate in time.
2. One stopwatch timer and one ignition device each.
3. Needle valve regulates the height of flame.
4. The burner is fixed on the sliding track for easy operation. The needle valve can adjust the flame height.
5. Equipped with ASTM D5025 standard Bunsen lamp with inner diameter of 9.5 mm (+0.3 mm), the flame temperature and height can be adjusted.
6. Equipped with GB/T 17622-2008 6.6.2 standard stainless steel sample stand two;
7. Equipped with flame height gauge.
Pwodwi parameters of the Vertical Flame Tester
| aplikasyon | Sekirite Pwoteksyon |
| Standards | AQ 6103, EN 60903: 2003 |
| dimansyon | 500mm (W) X 550mm (H) X 300mm (D) |
| Pwa | 19 KG |
| kondisyon Elèktrik | 220V, 50Hz, 3A |
| Kondisyon anviwònman | Tanperati (20 + 2) degre C, Imidite (65 + 5)% |
| kondisyon gaz | gaz pwopàn |
