Vertical Nplaim Tester
Vertical Flame Tester The Insulating Glove Fire Resistance Test
Product introduction of the Vertical Flame Tester
Raws li GB / T 17622-2008 thiab EN 60903 lub insulating cov hnab looj tes hluav taws kuj kuaj ntaus ntawv yog tsim, uas yog haum rau nyob ua hauj lwm insulating cov hnab looj tes hluav taws kuj kuaj.
Performance characteristics of the Vertical Flame Tester
1. Standard stainless steel box with transparent observation window can detect flame spread rate in time.
2. One stopwatch timer and one ignition device each.
3. Needle valve regulates the height of flame.
4. The burner is fixed on the sliding track for easy operation. The needle valve can adjust the flame height.
5. Equipped with ASTM D5025 standard Bunsen lamp with inner diameter of 9.5 mm (+0.3 mm), the flame temperature and height can be adjusted.
6. Equipped with GB/T 17622-2008 6.6.2 standard stainless steel sample stand two;
7. Equipped with flame height gauge.
Khoom parameters of the Vertical Flame Tester
Daim ntawv thov | Kev Nyab Xeeb tiv thaiv |
Standards | AQ 6103, EN 60903: 2003 |
dimension | 500mm (W) X 550mm (H) X 300mm (D) |
Nyhav | 19 KG |
Hluav taws xob cov uas yuav tsum tau | 220V, 50HZ, 3A |
Environmental yuav tsum | Kub (20 + 2) degree C, Vaum (65 + 5)% |
Gas yuav tsum | hluav taws roj zeb |